1. How to install the fingerprint lock?

1. Drill the position of the lock body installation hole according to the lock body installation dimension drawing;

2. Put the lock body into the hole in turn, find the correct fixing screw, install the screw and connecting screw on the outer panel part, insert the linkage square rod into the square rod hole of the lock body, and align the outer panel part and the linkage square rod hole with the hand, Install outer panel components;

3. Install the inner panel parts, and tighten the screws in alignment; insert the lock body into the key hole from the inside to the outside; align the screws from the panel holes of the lock body to the installation holes of the lock body, insert the screws and tighten. Install a lock box or lock plate on the door frame;

4. After wearing it for the first time, turn the outer main knife and the inner main knife to observe whether the oblique tongue can be recovered and protruded smoothly; turn the knob on the rear panel to feel whether the square tongue is restored smoothly; turn the button back and forth to feel whether the square tongue is smoothly protruding;

5. After each installation screw is tightened, repeat the above actions and test several times. If each action is not smooth, adjust the position after loosening the screw, and try again until it is suitable;

2. Introduction to the installation steps of fingerprint lock

Step 1: The fingerprint door lock is a high-tech product. The application environment of the door lock plays an important role in the normal use of the door lock, especially in the environment containing a large amount of corrosive substances in dust and air, which has a great impact on the normal use of the door lock. big. Therefore, in order to use the door lock normally and prolong the life of the door lock, it is recommended to install the door lock after the room is decorated.

Step 2 (After the door lock is installed and debugged, in order to facilitate the registration administrator to quickly use the fingerprint door lock, it is recommended to register a set of fingerprints or passwords, so that the door can be successfully opened when the fingerprints are worn out during registration.

The third step (fingerprint lock is the perfect combination of the world's leading biometric technology and traditional electronic door locks. In order to let you better feel its convenience and advanced nature, please read the operating instructions carefully and randomly before using it.